Hardwood Flooring in Clayton, NC

Hardwood floor installation typically ranges from $6–$12 per square foot installed, depending on wood species, grade, and subfloor condition. We provide free, no-obligation estimates for every project. Call (984) 400-4OAK or fill out the contact form.

Most refinishing projects take 4 to 5 days: two days to sand, half a day to stain (if applicable), and two days for finish coats to cure. We use the Bona PowerDrive planetary sander with HEPA dust containment for a virtually dustless process.

Refinishing means sanding the floor down to bare wood, then applying stain and fresh finish coats. It is ideal for floors with deep scratches, water damage, or stain changes. Recoating (screen-and-recoat) is for floors where the finish is dull but the wood is structurally sound. We lightly abrade the surface and apply a new topcoat. Recoating is faster and less expensive.

Yes. Izral Daniels handles every consultation personally, is on-site for color decisions and quality checks throughout the job, and performs the final inspection before considering a project complete. Gerardo, our Lead Supervisor since 2008, runs the job site daily. You get consistent, experienced people on your floor from start to finish.

We serve Johnston County (Clayton, Garner, Smithfield, Selma, Four Oaks), Wake County (Raleigh, Cary, Apex, Fuquay-Varina, Holly Springs, Wake Forest), and Durham County (Durham, Chapel Hill, Carrboro). Call to confirm your specific location.

Yes. All work carries a 5-year warranty. We also perform moisture testing on every installation job before the first board goes down. Moisture problems caught early prevent floor failures later.

We can get very close. Stain matching is something we take seriously. We test and blend on-site before applying anything to the full floor. That said, wood species, age, grain variation, sun exposure, and prior finish layers all affect how a stain absorbs and reads visually. An exact match is not always possible, but a skilled match from an experienced eye usually gets you there. We will show you the test result and get your approval before we proceed.

Standard metal floor vents break up the visual continuity of a hardwood floor. Our custom CNC flush-mount vents are manufactured from your actual flooring material in Clayton, NC, so they blend seamlessly into the floor. We're the only contractor in the Triangle offering this service.